2024 Chris Craft Launch 27 Base

2024 Chris Craft Launch 27 Base

Swipe to View More

  • Year 2024
  • Make Chris Craft
  • Model Launch 27
2024 Chris Craft Launch 27 Base

2024 Chris Craft Launch 27 Base

2024 Chris Craft Launch 24

The Position of Power.

A wide captain’s chair puts you in control behind gleaming gauges and a rich, mahogany steering wheel. The luxurious diamond-pattern stitching is complemented by a thick stainless steel bar. And a thigh bolster brings added height and visibility.

Features may include:

  • Teak - Beverage Holder Accents
  • Teak - Bow Accents w/ Stainless-Steel Inserts & Chris-Craft Stainless-Steel Logo
  • Teak - Cockpit Steps
  • Teak - Engine Hatch Walk-Over
  • Teak - Foredeck and Anchor Locker
  • Teak - Helm Footpad / Footrests
  • Teak Maintenance Kit
  • Black Teak Caulk Color
  • 5 Year - Component Warranty
  • 3 Year - Canvas/Upholstery Warranty
  • 5 Year - Transferable Warranty
  • Air Intakes – Stainless Steel
  • Anchor - Bow Locker in Teak (Includes Chris-Craft Logo Inlay)
  • Bow Scuff Plate – Stainless Steel
  • Certifications and Standards - NMMA, ABYC, USCG
  • Color Selections - Boot Stripe, Multiple Color Selections
  • Color Selections - Hull Side, Gelcoat Ivory Cream
  • Deck Fill Plates – Stainless Steel
  • Deck - Diamond Pattern Non-Skid, Fiberglass
  • Flag/Pennant - Embroidered Chris-Craft and US Flag Kit w/Stainless Steel Magnetic Pole and Base
  • Gunnel Trim Rubrail - Molded PVC w/Stainless Steel Insert
  • Hardware – Stainless Steel Bow and Stern Eyes
  • Hardware – Stainless Steel Bow Light Cover
  • Hardware - Chrome Plated Stainless Steel Fasteners
  • Hardware - Stainless Steel Mooring Cleats
  • Hardware – Stainless Steel Thru-Hull Fittings
  • Hull – Chris-Craft Trademark Tumblehome Design
  • Hull - Deep V Bottom w/Flared Bow
  • Hull - Deck Joint - Mechanically, Chemically Bonded
  • Hull - Stringer System and Liner, 1 Piece Fiberglass Foam Filled for Floatation and Noise Reduction
  • Swim Platform Ladder - 3 Step, Stainless Steel, Hidden
  • Swim Platform Grabhandle – Stainless Steel
  • Top - Bimini Canvas Top w/ Stainless-Steel Bows
  • Trim Tabs - Lenco w/Indicators
  • Ventilation Grates - Stainless Steel
  • Beverage Holders - Stainless Steel
  • Bolsters - Padded Gunwale Mounted
  • Door - Wind, Hinged, Folds to Deck in Bow Area
  • Drains – Stainless Steel
  • Grabrails – Stainless Steel
  • Helm - Compass, Dash Mounted
  • Helm - Dash, Gauge and Switch Panels w/Silver Perforated Panels
  • Helm - Digital Gauge Package, Chris-Craft Branded
  • Helm - Electronics Pkg, Garmin 7” Multifunctioni Display w/ Chart Plotter & DF
  • Helm - Engine Controls, Electronic Control - EVC/DTS/DEC
  • Helm - Engine Control, Chrome, Side Mounted
  • Helm Flush Mounted Electronics
  • Helm – Electric Single Trumpet Horn
  • Helm - Ignition Safety Switch(es)
  • Helm – Stainless Steel Model Designator
  • Helm – Mahogany Steering Wheel
  • Helm - Steering, Tilt w/Power Assist
  • Helm - Stereo Remote, MP3/USB Inputs w/Fusion Bluetooth Enabled
  • Lighting - LED Courtesy
  • Outlets/Input - 12v Accessory Outlet(s)
  • Outlets/Input - USB Auxiliary Input
  • Seating - Aft Cockpit, Port and Starboard Rear Facing Sun Lounger

Dimensions

Overall Length W/ Swim platform: 26'8" (8.13 m) | W/o Swim platform: 24'10" (7.57 m)
Overall Height 5'9" (1.75 m)
Length Centerline: 23'8" (7.21 m) | Waterline: 21'8" (6.6 m) | Hull: 25'3" (7.7 m)
Beam Maximum: 8'6" (2.6 m) | Transom: 7'7" (2.31 m) | Waterline: 5'7" (1.7 m)
Center of Gravity Forward of Transom Keel: 5'8" (1.73 m)
Dead Rise 20°
Draft Draft Prop Raised: 17" (43 cm) | Draft Prop Lowered: 36.5" (92 cm)
Bridge Clearance Windshield: 53" (1.35 m)
Dimensions Freeboard Forward: 40" (1.01 m) | Freeboard at Half Length: 34" (86 cm) | Freeboard Aft: 24.5" (62 cm) | Transom Angle: 13°

Capacities

Fuel Capacity 77 gal (291 l)
Seating Capacity Max: 10 Persons
Fresh Water Capacity 9 gal (34 l)

Weights

Dry Weight 6,000 lbs (2,722 kg)

Product Photography